GF Fingerprint Reader
The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.
Key Features
- Work with GV-AS / GV-EV Controller and GV-ASManager
- Can be a standalone fingerprint reader
- Three types of access modes: card only, fingerprint only and card plus fingerprint
- Connect with GV-AS Controller through TCP/IP interface (WAN)
- Enroll fingerprints through TCP/IP connection with GV-ASManager (Fingerprint Only Mode)
- Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security
- Capacitive sensor for GV-GF1921 / Optical sensor for GV-GF1922
Accessories
Model No | Name | Details | |
---|---|---|---|
GV-AS ID Card & GV-AS ID Key Fob | For Card Mode, the GV-AS ID Card / Tag is required. 13.56 MHz cards and tags are available. |
Packing List
- Fingerprint reader
- Data Cable (of 30 cm / 0.98 feet)
- Manager Enroll Card
- Manager Delete Card
- Mounting Plate
- Standard Screw x 2
- Plastic Screw Anchor x 2
- Security Screw
- Torx Wrench
- Connector Wire
- Software CD
- Warranty Card
Note:
- For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version:
* GV-ASManager: V4.0 or later
* GV-AS210 / 410 / 810: V1.1 or later
* GV-AS2110 / 4110 / 8110: V1.23 or later - GV-GF1921 / 1922 do not support third-party controllers.
- All specifications are subject to change without prior notice.